• Motorola cross-use

  • Discussion related to railroad radio frequencies, railroad communication practices, equipment, and more.
Discussion related to railroad radio frequencies, railroad communication practices, equipment, and more.

Moderator: Aa3rt

  by Knife-Switch
 
Anyone know if the Motorola RMN4052B headset is compatible with the Motorola CDM1250 radio?

The site says its compatible with our handheld HT750, but I am looking for dual use running ENG and working the ground.

Thanks

  by clearblock
 
The RMN4052B requires an adapter cable to interface the radio. I see the RKN4097 cable for the HT750 but I can not find any cable listed to interface a CDM series mobile.

You might want to look at David Clark headsets. They have adapter cables to interface their headsets to almost anything.

http://www.davidclark.com/TwoWay/twowaymain.aspx

  by CarterB
 
The CDM 1250 mobile radio can be outfitted with a Peltor MT7H79A tactical headset and the required PTT cable and FL1STD-B harness. The radio will need to go into a shop to have the 'leads' for the harness installed. Peltor makes a GREAT headset. I am a Motorola Dealer and sell them all the time to line crews at airports.

http://www.peltoraviation.com/peltor.co ... MT7H79A001

The David Clark headsets also are quite good.

  by CarterB
 
For David Clark, you will need the C3017 adapter, which plugs into the mic jack in front of the CDM1250 and a H3432 headset.

Good luck!!