by txbritt
Needed for maintenance, and restoration of two S-2's in Houston.
6 Injector pumps
6 injectors
The overspeed/governor drive assembly - all of it. from the large gear that bolts to the cam, all the way up to the bevel gears on the gov. itself.
Actually, the entire 1000lb fuel pump/cam/governor assembly would work.
waterpump
low oil pressure shutdown solenoid resistor panel
low oil pressure switch
A PG governor. I'd like to upgrade one of the locomotives to an internal switched governor, and do away with the SI thats currently installed.
2 cuno filters
I have a question about the air compressor on the 2350. It makes a "thunk" every so often, but only after the compressor unloads. Yes it has oil in it, and good pressure.
Thanks for any help,
Britt Bettell
Gulf Coast Railroad Museum
http://www.kingswayrc.com/gcst
6 Injector pumps
6 injectors
The overspeed/governor drive assembly - all of it. from the large gear that bolts to the cam, all the way up to the bevel gears on the gov. itself.
Actually, the entire 1000lb fuel pump/cam/governor assembly would work.
waterpump
low oil pressure shutdown solenoid resistor panel
low oil pressure switch
A PG governor. I'd like to upgrade one of the locomotives to an internal switched governor, and do away with the SI thats currently installed.
2 cuno filters
I have a question about the air compressor on the 2350. It makes a "thunk" every so often, but only after the compressor unloads. Yes it has oil in it, and good pressure.
Thanks for any help,
Britt Bettell
Gulf Coast Railroad Museum
http://www.kingswayrc.com/gcst