• Freight train speed question

  • For topics on Class I and II passenger and freight operations more general in nature and not specifically related to a specific railroad with its own forum.
For topics on Class I and II passenger and freight operations more general in nature and not specifically related to a specific railroad with its own forum.

Moderator: Jeff Smith

  by Frank
 
I'm not sure which forum this question belongs in but: Why are freight trains limited to 50mph? Most track in the US is Class 4, shouldn't it be good for speeds up to 60mph for freight? Or is it due to braking issues?
  by RandallW
 
For freight trains on Class 4 and Class 5 track, a railroad may reduce the speed limit for downhill movements (to prevent runaways) or, where that is not an issue, to reduce fuel consumption per ton-mile. I think that since generally the downhill limit is going to be less than 50 MPH where safety is a concern, it's almost always fuel costs that's driving this.
  by JayBee
 
RandallW wrote: Mon Oct 16, 2023 4:16 am For freight trains on Class 4 and Class 5 track, a railroad may reduce the speed limit for downhill movements (to prevent runaways) or, where that is not an issue, to reduce fuel consumption per ton-mile. I think that since generally the downhill limit is going to be less than 50 MPH where safety is a concern, it's almost always fuel costs that's driving this.
Reducing speed for the railroad companies, is like slow-steaming to the companies that operate the big containerships.
You want cheaper rates, your cargo will get there when it gets there.