Railroad Forums 

  • Need For a RS-3 the Electrical Print of the whole Locomotive

  • Discussion of products from the American Locomotive Company. A web site with current Alco 251 information can be found here: Fairbanks-Morse/Alco 251.
It is currently Tue Mar 21, 2023 6:48 am

Need For a RS-3 the Electrical Print of the whole Locomotive

Discussion of products from the American Locomotive Company. A web site with current Alco 251 information can be found here: Fairbanks-Morse/Alco 251.

Moderator: Alcoman

Need For a RS-3 the Electrical Print of the whole Locomotive

  by Owen S. Paulsen
 
The Print is call <Red Card system> ? An show the wire Conduit,Junction box,Terminal,list of Traction motor,Main gen,Governer on the engine,the Panel in the Electric.

The Unit suit be a RS-3. The RS-2 is not it. The two RS-2 and RS-3 have the different stuff on the Electric

The Era is 1949-52

If you have that print, The I need see if you can put to a disk, paper copy.

Stan

  by Alcoman
 
I have a electrical schematic for an RS-3 dated June 6, 1950 w/o electric braking. This was first made for the GM&O.
Its a very long diagram-about 10 feet. It would have to be copied.
Contact me off list for details.
[email protected]
 Return to “American Locomotive Company - ALCO”
 - All times are UTC-05:00 -