Steam locomotive delivery

Discussion related to Baldwin Locomotive Works, Lima Locomotive Works, Lima-Hamilton Corporation, and Baldwin-Lima-Hamilton.

Moderator: lumpy72

Steam locomotive delivery

Postby donoteat » Thu Jan 25, 2018 1:14 pm

How did Baldwin deliver the largest locomotives to customers?
Did they travel under their own power, or in regular freight trains?
Were there any tight curves or other obstacles that required special moves to clear?

I'd love to see pictures of big articulated steam leaving the Eddystone plant on the NEC if such a thing exists...
Posts: 7
Joined: Sun Mar 25, 2012 5:42 pm

Re: Steam locomotive delivery

Postby NorthWest » Thu Jan 25, 2018 2:03 pm

Most were simply delivered dead-in-tow with main rods disconnected in regular freight trains. Larger engines often had to be delivered partially disassembled, such as the Virginia 2-10-10-2s, which had cabs and front cylinders removed for clearance reasons. Others were operated under their own power if the delivery road was close.

I think some of the ATSF's late Baldwins ended up being car floated for part of their delivery route due to clearances.
User avatar
Posts: 493
Joined: Tue Jul 15, 2014 1:54 pm

Re: Steam locomotive delivery

Postby Engineer Spike » Sun Mar 04, 2018 11:19 pm

I live near the former Alco plant in Schenectady, NY. I believe that some larger engines were routed via large clearance routes. Alco might have shipped via D&H, which had large Challangers, and the Erie, which had large clearance, since it was formerly 6’ gauge. The point is that NYC might have been more direct, but for something like UP Big Boys, they would just use a routing which could handle the size.
Engineer Spike
Posts: 1871
Joined: Tue Mar 16, 2004 3:24 pm

Return to Baldwin-Lima-Hamilton

Who is online

Users browsing this forum: No registered users and 0 guests