Budd RDC Video

Discussion relating to the PRSL

Moderator: JJMDiMunno

Budd RDC Video

Postby glennk419 » Wed Jun 30, 2010 9:22 am

While not entirely specific to the PRSL, I came across this video which does contain some great PRSL footage including the "split" at Tuckahoe and shots from the tower. While well documented in print, I had never seen this in action before now. Enjoy....

User avatar
Posts: 2927
Joined: Sun Mar 14, 2004 7:44 pm
Location: Southeastern PA & Cape May County, NJ

Re: Budd RDC Video

Postby Steam man » Thu Jul 01, 2010 10:40 pm

I don't know how many times I saw it from the same vantage point. I laughed when they showed the operator moving the lever, a signal or locking lever, making it look easy as pie. It was a bit of hustling to pull off the signals,unlocking and locking them each time,wait till they cleared the switch for the next move, then put your back into the switch lever,pull more locks and signal levers, then put the railroad back to "normal".
The whole tower would shake when pulling switches and don't talk about Armstrong Interlockings in winter with snow and ice. You learned to start pulling but still be able to let go of the lever, as if it sprung back due to the rods or bellcranks getting hung up you'd go right on your bum. Then fill out the train sheet, ring the next operator(s) down the line, the next operator up the line,report arrival and departure to the train dispatcher...I loved it.

Good find Glenn!!!!
W.L Avis
Steam professional since 1974
Former Block Operator- PRSL
Steam man
Posts: 268
Joined: Sat Jul 10, 2004 6:35 pm
Location: South Jersey

Re: Budd RDC Video

Postby eddiebehr » Sat Jul 03, 2010 9:03 pm

That film is also in the Locomotive and Rolling Stock forum in the Self-Propelled Rail Cars section.
Posts: 133
Joined: Thu Feb 16, 2006 8:54 pm

Return to Pennsylvania-Reading Seashore Lines

Who is online

Users browsing this forum: No registered users and 1 guest