READ ME FIRST: Welcome to the Loco & Rolling Stock Forum

General discussion about locomotives, rolling stock, and equipment

Moderator: John_Perkowski

READ ME FIRST: Welcome to the Loco & Rolling Stock Forum

Postby Otto Vondrak » Mon Aug 01, 2005 7:26 pm

Welcome to the Locomotives, Rolling Stock & Equipment on RAILROAD.NET!

- This forum is meant for the discussion of railroad-related topics pertaining to the technical aspects of locomotives, rolling stock, and other railroad equipment, past and present. Questions pertaining to specific manufacturers or construction techniques are encouraged. Questions regarding a specific locomotive manufacturer are more than welcome, however we do have several forums for specific builders where you may get a better answer. This forum is NOT for general railroad operation questions.

American Locomotive (ALCo):
http://railroad.net/forums/viewforum.php?f=4

Baldwin-Lima-Hamilton:
http://railroad.net/forums/viewforum.php?f=5

Electro-Motive (EMD):
http://railroad.net/forums/viewforum.php?f=6

Fairbanks-Morse:
http://railroad.net/forums/viewforum.php?f=7

General Electric (GE)
http://railroad.net/forums/viewforum.php?f=8

- Any members who wish to reference a current news article from another site are encouraged to summarize the article in their own words, and provide a link back to the original.

- Thread titles may be edited for content and clarity at the Moderator's discretion.

- Offensive or abusive posts from anyone will be removed immediately.

- Any questions or comments about the operation of this forum or the site in general can be addressed to the forum Moderator or one of the Site Administrators.

Welcome aboard! We look forward to your contributions!
----------------------------------------------
Moderator: New York State Railfan :: New York Central :: Toy Trains
NYW&B Fan Site :: A Magazine I Read Often :: A Museum I Volunteer At
User avatar
Otto Vondrak
 
Posts: 20146
Joined: Thu Mar 11, 2004 6:47 pm
Location: New York

Welcome!!

Postby John_Perkowski » Thu Jul 30, 2009 9:54 am

If it’s above the rails, or if it’s in the shops , by the fuel rack, or near the roundhouse, it’s fair game for this forum :-D

If it’s purely a matter of one of the specified builders, I’ll move your message to the right Forum, but I will leave a shadow topic behind

Please follow the Mike, Otto, and Jessy’s general rules for Railroad.net. This place works much better when we all do that.

There are two specific rules for this Forum:

- Please Foam Responsibly. It’s about your safety. It’s about the safety of T/E crews, shop forces, and railroad police.

- Please think before you post about actions which break railroad rules, or where employees broke railroad rules. I know at least two readers of railroad.net who work for the Surface Transportation Board. They have an obligation to report discovered knowledge of unsafe practices.

With that, a little about me:

I’m principally a passenger railfan. I love passenger equipment. HW, LW, Pullman, Budd, or Siemens, it makes no difference. My interests lie first with the Union Pacific, because as a child I was able to take Trains 9 and 10, the City of Saint Louis, to see my grandparents in Abilene, KS. I also have a passing interest in the Southern Pacific, the Burbank Junction branch line ran next to my subdivision as a youngster. I remember the daily locals as well as the occasional diverted Daylight or Lark. Sadly, this track has been ripped up. You will also find me on Tom Madden’s Passenger Car List group.

I also enjoy the historic Santa Fe, as well as the current BNSF. I daily drive to work along the route of the Pioneer Zephyr from Kansas City to Lincoln NE. I see a lot of MOW equipment at the East Leavenworth siding. As I write this a Herzog custom job (a 5 doublestack articulated set with some form of Diesel over Blomberg trucks one one end, and a cab on a flat on the other end) is working cleanup from the old entry into the Leavenworth, KS wye. Daily, I see coal unit trains with distributed power (two days ago both fore and aft had two units each), grain drags Southbound and fast moving empties Northbound, KCS trackage rights runs, and business trains.

Finally, I love spending time down by Kansas City Union Station. Tracks 27 and 28 there have become PV house tracks; as I write this there's an eclectic set of historic passenger equipment operating from them.

Oh ... my money and my son attend Mizzou. :wink:

With that, all aboard! :-D
~John Perkowski: Moderator: General Discussion: Locomotives, Rolling Stock, and Equipment
Assistant Administrator: Railroad.net/forums
Please don't feed the spammers! If you see spam, please notify a Moderator
User avatar
John_Perkowski
 
Posts: 4484
Joined: Wed Mar 17, 2004 5:12 pm
Location: Off the Q main near Parkville MO

Re: READ ME FIRST: Welcome to the Loco & Rolling Stock Forum

Postby John_Perkowski » Tue Feb 21, 2012 10:59 am

It's been a long time, but I'm going to add a guideline:

Please, let your comment add value to the discussion. Comments that just fill white space don't help the conversation. If you think a photo is ugly, say why, please, as just one example.

Thanks to all of you for making this Forum the easiest on all of Railroad.net
~John Perkowski: Moderator: General Discussion: Locomotives, Rolling Stock, and Equipment
Assistant Administrator: Railroad.net/forums
Please don't feed the spammers! If you see spam, please notify a Moderator
User avatar
John_Perkowski
 
Posts: 4484
Joined: Wed Mar 17, 2004 5:12 pm
Location: Off the Q main near Parkville MO


Return to General Discussion: Locomotives, Rolling Stock, and Equipment

Who is online

Users browsing this forum: No registered users and 2 guests