Cement Plant

Discussion relating to the D&H. For more information, please visit the Bridge Line Historical Society.

Moderator: MEC407

Cement Plant

Postby Mem160 » Sun Jul 20, 2014 7:33 pm

I am looking to make a loosely based model of the Howe's Cave Cement Pant, most likely using PVC Pipe and Gator Foam. I do not have the self expectations, nor the required room for the exact replica, so again, I am going with the "loosely based" concept. Does anyone know the "ballpark" dimensions on the concrete silos where the D&H 2-Bay cement hoppers were located? Just an idea for myself, so that I know how high to make them and if I should use 2" or 3" PVC piping.

Thanks,

- Mark
Mem160
 
Posts: 147
Joined: Sun Sep 11, 2005 7:59 am

Re: Cement Plant

Postby Benjamin Maggi » Mon Jul 21, 2014 8:47 am

For what it is worth, Ken Nelson wrote an article about modeling a cement plant in the July 1994 Model Railroader magazine, and I believe it was based on Howe's Cave Cement Plant. It had drawings and lots of pictures. I suggest you track down a back issue.
Benjamin L. Maggi
A&A Railroad Forum Moderator
User avatar
Benjamin Maggi
 
Posts: 1038
Joined: Wed Apr 07, 2004 8:52 am
Location: Albany, NY

Re: Cement Plant

Postby Mem160 » Mon Jul 21, 2014 11:12 am

WOW!!!!! I am so glad you brought that up! HaHaHaHa! I got that issue off of eBay a couple of years ago and I forgot I had it! You reminded me! Thanks I'll look into it. Thank you.

- Mark
Mem160
 
Posts: 147
Joined: Sun Sep 11, 2005 7:59 am

Re: Cement Plant

Postby Benjamin Maggi » Wed Jul 23, 2014 3:52 pm

Ken is a good friend of mine. When I lived in Western NY I read the article as a kid and didn't think much of it. After moving to Albany and focusing on the D&H, it became more useful. Ken's model is nice too!
Benjamin L. Maggi
A&A Railroad Forum Moderator
User avatar
Benjamin Maggi
 
Posts: 1038
Joined: Wed Apr 07, 2004 8:52 am
Location: Albany, NY

Re: Cement Plant

Postby Mem160 » Wed Jul 23, 2014 8:46 pm

What's the best method for cutting the doors into the PVC Silos for the tunnelway for the freight cars ?
Mem160
 
Posts: 147
Joined: Sun Sep 11, 2005 7:59 am

Re: Cement Plant

Postby Benjamin Maggi » Tue Jul 28, 2015 2:11 pm

I would suggest a Dremel tool at high speed to rough cut the doorways. Leave plenty of extra plastic to file away the melted bits.
Benjamin L. Maggi
A&A Railroad Forum Moderator
User avatar
Benjamin Maggi
 
Posts: 1038
Joined: Wed Apr 07, 2004 8:52 am
Location: Albany, NY


Return to Delaware & Hudson

Who is online

Users browsing this forum: No registered users and 2 guests