Old Freight House?

Discussion of the past and present operations of the Long Island Rail Road.

Moderator: Liquidcamphor

Old Freight House?

Postby fender52 » Tue Nov 20, 2018 11:34 am

LongBeach Frt.JPG
Long Beach Frt? (R Sturm photo - KFehn collection) I know this was used by the car inspectors when I worked down there
Attachments
Seaford 2 5-65.JPG
Seaford Frt (R Sturm photo - KFehn collection)
fender52
 
Posts: 83
Joined: Mon Apr 25, 2005 7:54 pm
Location: Long Island

Re: Old Freight House?

Postby Kelly&Kelly » Tue Nov 20, 2018 2:30 pm

That's the Long Beach baggage house. It has been moved north with the construction of the parking garage. Long Beach once had an elaborate multi-track freight terminal and huge freight house several blocks west of the station. It stood just east of Magnolia Blvd. between Reynolds Channel and Pine Street. It was demolished in 1938. The city's ice skating rink stands on the property now. Well into the 1970's, Pine Street was paved in Belgium block with the freight rails still embedded in the middle of the street. Try finding a photo of that freight house!

Long Beach also had a wye, but that's another story.

One last Long Beach thing: The 1910 crew welfare facility was moved from the throat of the yard in 1943 and converted into a bungalow behind a private house at 24 East Pine Street where it remains today. Still has the chimney from the coal stove.
Last edited by Kelly&Kelly on Tue Nov 20, 2018 2:51 pm, edited 5 times in total.
Kelly&Kelly
 
Posts: 256
Joined: Sat Jul 11, 2015 8:50 am

Re: Old Freight House?

Postby SwingMan » Tue Nov 20, 2018 2:42 pm

Very crazy how the parking garage was built around that that particular building.
SwingMan
 
Posts: 2281
Joined: Tue Dec 12, 2006 7:52 pm

Re: Old Freight House?

Postby R36 Combine Coach » Tue Nov 20, 2018 3:38 pm

First image appears to be late 1963 with new MP75s.
Since my friend continues to chain smoke nonstop, she is probably an Alco.
User avatar
R36 Combine Coach
 
Posts: 5220
Joined: Mon Jun 09, 2008 8:51 pm

Re: Old Freight House?

Postby scopelliti » Tue Nov 20, 2018 5:35 pm

R36 Combine Coach wrote:First image appears to be late 1963 with new MP75s.

Don't think so. They are MP75s but are missing the slogan below the windows "Your STEEL THRUWAY to the FAIR GATEWAY" and the World's Fair symbol. So that says some years later..not sure when they removed that slogan. 1967?
Pat
User avatar
scopelliti
 
Posts: 531
Joined: Thu Mar 11, 2004 10:35 pm
Location: Big Flats, NY

Re: Old Freight House?

Postby BuddR32 » Wed Nov 21, 2018 12:55 am

Thanks for posting the Long Beach Photo. Building looks like it needs a wrecking ball today. Inside at least.
BuddR32
 
Posts: 199
Joined: Thu Jun 12, 2014 2:14 pm

Re: Old Freight House?

Postby nyandw » Fri Nov 23, 2018 4:02 pm

Baggage House was ex-Express House Office, per Emery 1958 map. At track 10 on 2004 interlocking map below. Anyone know what the HUT between track 4/5 was for? Thank you.
Attachments
Emery-Map-Long Beach-1958 (Keller).jpg
G.O. - LEAD Interlocking - Long Beach- 04-15-04 (LIRR-Keller).jpg
G.O. - LEAD Interlocking - Long Beach- 04-15-04 (LIRR-Keller)
User avatar
nyandw
 
Posts: 3436
Joined: Fri Mar 19, 2004 12:41 am

Re: Old Freight House?

Postby Kelly&Kelly » Fri Nov 23, 2018 6:09 pm

Long Beach Yard is equipped with "YM-2000 remote controlled electric yard switches" installed in the 1990's, replacing switches that had to be lined by hand. The HUT shown in the 2004 signal print is a signal hut, from which these electric switches can be controlled. Normal control is by the block operator at LEAD tower, located on the drawbridge. In the event that switch circuit communication fails between the tower and yard, the switches can be controlled from the hut. They can also be operated with a removable hand crank or by buttons electrically on the ground at each switch.

The switches are not interlocked, as opposing and conflicting movements are not fully protected against by signals. Hence the yard is not part of LEAD Interlocking. Trains seek verbal permission into and out of each station track from the block operator at Lead. The yard switch operation is limited, however, by some simplified track circuits that lock out particular switch movement against occupied routes. This can cause operational complexities as a misrouted train, for example, may have to reverse and clear the entire yard before any one switch on its route can be relined. For the same reason, parallel moves at the same time are also limited.

The switches are operated by local 120VAC power and are susceptible to local power failures. Several other yards are equipped with the YM-2000 switches and share similar operating parameters.
Kelly&Kelly
 
Posts: 256
Joined: Sat Jul 11, 2015 8:50 am

Re: Old Freight House?

Postby gamer4616 » Fri Nov 23, 2018 7:06 pm

There has been an upgrade to the switches in the yard recently. Referencing the 2004 map above, the following are now dual control switches:

41
13
51
45
57
56
gamer4616
 
Posts: 39
Joined: Mon Dec 19, 2016 6:49 pm

Re: Old Freight House?

Postby nyandw » Fri Nov 23, 2018 8:38 pm

Kelly&Kelly wrote:Long Beach Yard is equipped with "YM-2000 remote controlled electric yard switches" installed in the 1990's, replacing switches that had to be lined by hand. The HUT shown in the 2004 signal print is a signal hut, from which these electric switches can be controlled. Normal control is by the block operator at LEAD tower, located on the drawbridge. In the event that switch circuit communication fails between the tower and yard, the switches can be controlled from the hut. They can also be operated with a removable hand crank or by buttons electrically on the ground at each switch.

The switches are not interlocked, as opposing and conflicting movements are not fully protected against by signals. Hence the yard is not part of LEAD Interlocking. Trains seek verbal permission into and out of each station track from the block operator at Lead. The yard switch operation is limited, however, by some simplified track circuits that lock out particular switch movement against occupied routes. This can cause operational complexities as a misrouted train, for example, may have to reverse and clear the entire yard before any one switch on its route can be relined. For the same reason, parallel moves at the same time are also limited.

The switches are operated by local 120VAC power and are susceptible to local power failures. Several other yards are equipped with the YM-2000 switches and share similar operating parameters.


Thank you. You're the best.
User avatar
nyandw
 
Posts: 3436
Joined: Fri Mar 19, 2004 12:41 am

Re: Old Freight House?

Postby nyandw » Fri Nov 23, 2018 8:43 pm

gamer4616 wrote:There has been an upgrade to the switches in the yard recently. Referencing the 2004 map above, the following are now dual control switches:

41
13
51
45
57
56



Dual control would indicate from the HUT and LEAD?
User avatar
nyandw
 
Posts: 3436
Joined: Fri Mar 19, 2004 12:41 am

Re: Old Freight House?

Postby nyandw » Fri Nov 23, 2018 11:52 pm

Robert Strum's photo is c.1965? (Kevin you might know better.) Any idea when this baggage house was moved/razed?
User avatar
nyandw
 
Posts: 3436
Joined: Fri Mar 19, 2004 12:41 am

Re: Old Freight House?

Postby SwingMan » Sat Nov 24, 2018 12:36 am

nyandw wrote:
gamer4616 wrote:There has been an upgrade to the switches in the yard recently. Referencing the 2004 map above, the following are now dual control switches:

41
13
51
45
57
56



Dual control would indicate from the HUT and LEAD?


Dual-control switches are power operated switches that can also be operated by hand as needed. They are very common on the LIRR.
SwingMan
 
Posts: 2281
Joined: Tue Dec 12, 2006 7:52 pm

Re: Old Freight House?

Postby Kelly&Kelly » Sat Nov 24, 2018 7:04 am

We didn't know the switches were switched. The YM2000's were somewhat problematic. They were cheap and easily installed. But they required constant maintenance, jamming with the smallest debris or lack of grease. While a crank was available to operate them by hand, train crews were not equipped to crank them. They also had a primitive point detection system that only checked the position of the motor and didn't confirm that the points were actually closed.

Most "dual controlled" switches on the LIRR are interlocked -- that is they are protected from opposing and conflicting moves by a signal system using "vital" circuitry -- but by operating definition they do not have to be. (A power operated switch also equipped for hand operation). We suppose in Long Beach Yard, the replacement switches remain handled by the same limited track circuits that protected the YM2000's. The "CM" Clearance Marker signals (signs) on the interlocking print delineate the limits of the track circuits. The dual controlled switches probably can still be operated electrically from several locations.

The new switches should be a more robust and perhaps safe design than the YM2000 and the operating lever makes them more versatile. Good move!
Kelly&Kelly
 
Posts: 256
Joined: Sat Jul 11, 2015 8:50 am

Re: Old Freight House?

Postby fender52 » Sat Nov 24, 2018 10:31 am

Steve, Bob's photo is actually labeled 8-66. There are others dated around the same time when it seems he went up the branch taking photos.

As for the baggage/frt house, if I talk to my uncle, I'll ask. He was in freight around that time. His memory is still pretty good and still can tell you about freight on the east end.
fender52
 
Posts: 83
Joined: Mon Apr 25, 2005 7:54 pm
Location: Long Island

Next

Return to Long Island Rail Road (LIRR)

Who is online

Users browsing this forum: Kelly&Kelly, RRJS3 and 5 guests