Things Not Looking Good for Mill Deal

Discussion of present-day CM&Q operations, as well as discussion of predecessors Montreal, Maine & Atlantic Railway (MMA) and Bangor & Aroostook Railroad (BAR).

Moderator: MEC407

Things Not Looking Good for Mill Deal

Postby scrumdiddley92 » Fri Apr 08, 2011 3:47 pm

The latest on the Millinocket and East Millinocket ordeals.....

http://new.bangordailynews.com/2011/04/ ... stor-says/
scrumdiddley92
 
Posts: 20
Joined: Fri Jan 14, 2011 7:48 pm

Re: Things Not Looking Good for Mill Deal

Postby necr3849 » Wed Apr 13, 2011 4:39 pm

necr3849
 
Posts: 170
Joined: Fri Apr 08, 2011 7:55 pm

Re: Things Not Looking Good for Mill Deal

Postby necr3849 » Thu Apr 14, 2011 3:54 pm

Although unlikely, can things get any worse?

http://new.bangordailynews.com/2011/04/ ... ying-them/
necr3849
 
Posts: 170
Joined: Fri Apr 08, 2011 7:55 pm

Re: Things Not Looking Good for Mill Deal

Postby Cowford » Fri Apr 15, 2011 8:24 am

From today's PPH:

Interesting that the mill president picked on rail specifically as THE external contributing factor for their demise:

"...Rail service, described as unreliable and expensive by Whyte, along with the inefficient oil-fired boilers, are two of the biggest obstacles to profitability, Whyte said..."

There were/are certainly a bunch of other factors, so how fair a statement that is is open to debate.

http://www.pressherald.com/news/threat- ... 04-15.html

The unfortunate developments certainly bring into question the future of MMA. Two of its anchor customers are (at least temporarily) dead, and the third is trucking around them. This latest situation even calls into question the need for MMA to retain the Brownville Jct - Millinocket line segment.
Cowford
 
Posts: 2746
Joined: Thu Mar 18, 2004 12:34 pm
Location: Florida

Re: Things Not Looking Good for Mill Deal

Postby ShortlinesUSA » Fri Apr 15, 2011 1:57 pm

I'm right there with you, Cowford. I posed this same scenario in the Status of RFP thread. I'll repost here, as I too am interested in what is really left for the MMA if the mills do not reopen.

by ShortlinesUSA » Sat Apr 09, 2011 12:52 pm

roberttosh wrote:
"I think there will be a lot more fibre moving over these lines, both heading east to NB to supply Irving's demands as well as south to PAR for their mills. Not sure how the new carrier will connect with themselves at Brownville (haulage or trackage rights), but I'm guessing that the majority of the business will head east from there to Keag, where it will either be handed off to PAR or continue east to Saint John. There's not much going to and from the county that needs to be routed over the MMA (old CP main) and I'm of the opinion that what little business there is (i.e. lumber, fertilizer, oils, etc) that is moving to or from the midwest or the east coast will find it's way over PAR, which unlike the MMA, connects directly with the NS and CSXT."

ShortlinesUSA wrote:

"Overhead rights from Millinocket to Brownsville Jct. were among the conditions of the sale of the MMA lines to the state. I've got to hand it to the state, they toed the line on that issue to prevent the MMA from having captive interchange on both ends of the system when a new operator came in.

You bring up some interesting points on how this traffic will move. With the recent news that Katadhin's E. Millinocket plant has shut down, and if EMRY drags their own fiber out of the county and takes it elsewhere in their system or hands it off to PAR, what is left for the MMA? I can't see where they're going to have much else to move between BJct and Millinocket without the mill traffic after they drop EMRY's CP traffic at BJct to go to Saint John. I can't see them being very interested in paying upkeep on the line just for EMRY to overhead traffic to itself, either. Wonder how long it'll be until that line is unprofitable to them and we're headed right down the same road again?

Sorry to be doom and gloom on the MMA, but things just don't seem to be going their way, and pretty much haven't from the get go. But with both mills closed in the Millinockets, now it's starting to look doubtful if there will be much need for them to go past BJct, at least to the north."Mike Derrick
http://www.shortlinesusa.comShortlinesUSA

Posts: 98
Joined: Sat Jan 20, 2007 6:57 pm
Location: Alexandria, VA
Private messageWebsite
Mike Derrick
ShortlinesUSA
 
Posts: 147
Joined: Sat Jan 20, 2007 6:57 pm
Location: Chattanooga, TN

Re: Things Not Looking Good for Mill Deal

Postby necr3849 » Fri Apr 15, 2011 2:00 pm

Just last summer, we were saying how healthy the size of the #1 and #2 jobs were.
So much for that at least for now. Man, what do they really even have between Northern Maine Junction and Brownville besides the one small log yard and the Derby shops? I haven't really explored up that way too much other than the yards.
necr3849
 
Posts: 170
Joined: Fri Apr 08, 2011 7:55 pm

Re: Things Not Looking Good for Mill Deal

Postby riffian » Fri May 20, 2011 3:36 pm

More bad news....the owner of the two mill plans to begin scrapping them out.

http://www.wabi.tv/news/19418/owner-of- ... -for-scrap
riffian
 
Posts: 473
Joined: Sat Mar 20, 2004 10:29 am
Location: New Castle, Delaware

Re: Things Not Looking Good for Mill Deal

Postby necr3849 » Fri May 20, 2011 6:03 pm

Nothing personal, but this is kind of old news with a media-hyped spin.
necr3849
 
Posts: 170
Joined: Fri Apr 08, 2011 7:55 pm

Re: Things Not Looking Good for Mill Deal

Postby riffian » Fri May 20, 2011 6:25 pm

yeah - after I posted it I realized it was several weeks old. It is the latest news on the Mill closing, tho. Here's another take....

http://new.bangordailynews.com/2011/04/ ... ls/inocket mills, though, so still worth a look.
riffian
 
Posts: 473
Joined: Sat Mar 20, 2004 10:29 am
Location: New Castle, Delaware

Re: Things Not Looking Good for Mill Deal

Postby necr3849 » Fri May 20, 2011 10:09 pm

Hey, I'm not trying to correct your postings by any means:) I couldn't get the recent link you gave to work, so try this one...

http://new.bangordailynews.com/2011/05/ ... rs-warned- /
necr3849
 
Posts: 170
Joined: Fri Apr 08, 2011 7:55 pm

Re: Things Not Looking Good for Mill Deal

Postby MikeVT » Mon Oct 24, 2011 5:49 pm

good news for a change (at least for the near term)

http://www.boston.com/news/local/new_ha ... _at_mills/
MikeVT
 
Posts: 155
Joined: Wed Jun 17, 2009 6:55 pm

Re: Things Not Looking Good for Mill Deal

Postby rootsblown » Sat Dec 03, 2011 8:21 pm

Great Northern mill looks to be adding a new product line in the near future. Going to hire more employees. Things just might come around up there after all.
rootsblown
 
Posts: 32
Joined: Tue Oct 11, 2011 8:03 pm


Return to Central Maine & Quebec Railway (formerly Montreal, Maine & Atlantic / Bangor & Aroostook)

Who is online

Users browsing this forum: No registered users and 1 guest