Buzzer Component on Passenger Rail Cars

Discussion related to railroad radio frequencies, railroad communication practices, equipment, and more.

Moderator: Aa3rt

Buzzer Component on Passenger Rail Cars

Postby X4401 » Sat Apr 21, 2012 8:44 pm

This might be an off the wall question, but here goes. Does anyone know the manufacturer, brand, or model number of the communication buzzers used for passenger rail cars? I have seen the buttons (normally open, push button closed) and have even seen the "alerter" buzzers for the cab signals, but never the actual signal buzzer used by train crew to signal the Engineer.

I'm specifically thinking of the New Jersey Transit comets, arrows, and newer multi-level coaches. They all seem to have the same buzzer. This is for a non-railroad application, but interestingly enough, there is a need for a non radio communication between driver and tail end worker for basic "forward" "reverse" "stop" and "STOOOOOOOOOOOOOOP!" in a high noise environment. Why re-invent the wheel?

The power supply and push button I can easily handle. The buzzer is the tough part, all google searches have come up with buzzer codes which I already know by heart, or very very vague manufacturers brochures. Total quantity needed is less than 5, and there's no way I'd buy anything that was stolen from a railroad.

Any help would be greatly appreciated. Thanks.
X4401
 
Posts: 87
Joined: Thu Apr 01, 2010 5:53 pm

Re: Buzzer Component on Passenger Rail Cars

Postby DutchRailnut » Sun Apr 22, 2012 8:03 am

believe the buzzers are made by vapor-clark
they are 74 volt DC or 32 volt DC
If Conductors are in charge, why are they promoted to be Engineer???

Retired Triebfahrzeugführer
User avatar
DutchRailnut
 
Posts: 21176
Joined: Thu Mar 11, 2004 8:02 pm
Location: released from Stalag 13

Re: Buzzer Component on Passenger Rail Cars

Postby X4401 » Mon Apr 23, 2012 7:36 pm

WOW! Thanks! Long story but I typed in vapor-clark and it brought up wabtec (who doesn't love wabtec, except 19th century brakemen?) Wabtec didn't have it but they were mentioned in a Bombardier spec sheet which specifies a "Conductor's Buzzer 4.50KHZ." Then another Google search turned up such a buzzer in 8-32v made by Soberton Inc, which was listed as "Obsolete Circuitry." Long story short, thanks to your help Dutchrailnut, there are a few "PB-2211 BUZZER 4.50KHZ 3-28VDC 85DB"s on order.

If anyone cares the other buzzers on the ABB Multi-levels are as follows:
* Loco-Alarm (sonalert) - 2.9 Khz intermittent fast pulse tone
* Wheel-Slip / Brake Warning (Sonalert) - 1.9 Khz continuous tone
* Conductor's Buzzer - 4.50 Khz continuous tone

This is probably one of the strangest searches in rr.net history lol. Thanks again!
X4401
 
Posts: 87
Joined: Thu Apr 01, 2010 5:53 pm


Return to Radio and Communications

Who is online

Users browsing this forum: No registered users and 2 guests