Beeps and Rings

Discussion related to railroad radio frequencies, railroad communication practices, equipment, and more.

Moderator: Aa3rt

Re: Beeps and Rings

Postby spence.smith » Wed Mar 17, 2010 5:33 am

I am looking for a CD or other media recording of a railroad telegraph suitable to put in a restored depot as a background sound. Anything that can steer to a possible source would be appreciated. I have done a Google source to no avail.
Military gifts specialists offer a select range of custom designed Military Rings for all branches of the armed services.
spence.smith
 
Posts: 1
Joined: Wed Mar 17, 2010 5:17 am

Re: Beeps and Rings

Postby Ken W2KB » Thu Mar 18, 2010 1:27 pm

spence.smith wrote:I am looking for a CD or other media recording of a railroad telegraph suitable to put in a restored depot as a background sound. Anything that can steer to a possible source would be appreciated. I have done a Google source to no avail.


The best search phrase is "american morse code" recordings. Found this one http://www.morsetelegraphclub.org/library/files/multimedia/sounds/godwrought.mp3
~Ken :: Fairmont ex-UP/MP C436 MT-14M1 :: Cessna 177B Cardinal N16019
Black River Railroad Historical Trust :: My Personal Site
User avatar
Ken W2KB
 
Posts: 5652
Joined: Thu Mar 11, 2004 9:27 pm
Location: Lebanon Township, Hunterdon County, New Jersey & Tiverton, RI USA

Re: Beeps and Rings

Postby EdM » Mon Mar 22, 2010 5:20 pm

Plate F wrote:That was a city police transmission captured on a railroad frequency with the interference tone. So what happened was that the police signal was too strong and pried into the railroad frequency? But why is it only on THAT particular frequency I ever hear the noise or even the wrong broadcast for that fact?

A radio "listens" to frequencies both above and below the local oscillator frequency, the local oscillator runs at either plus or minus the radios IF... That is what an image is, [some people call 'em 'intermods, which means intermodulation products' (or just mixing products)also at various multiples of the local oscillator frequency. These are real signals.. Real radios have preselection to filter these signals out, scanners, being broadbanded, escentially do not. These signals are another reason why an external preamplifier can cause more trouble than it is worth. These signals are real and can cause all kinds of problems, the reason why one is better off with an amateur two meter radio or RR freq only radio over a wide band scanner..... Elsie Kay
EdM
 
Posts: 215
Joined: Sat Mar 13, 2004 2:34 pm
Location: Long Island

Re: Beeps and Rings

Postby Plate F » Mon Mar 22, 2010 8:41 pm

EdM wrote:
Plate F wrote:That was a city police transmission captured on a railroad frequency with the interference tone. So what happened was that the police signal was too strong and pried into the railroad frequency? But why is it only on THAT particular frequency I ever hear the noise or even the wrong broadcast for that fact?

A radio "listens" to frequencies both above and below the local oscillator frequency, the local oscillator runs at either plus or minus the radios IF... That is what an image is, [some people call 'em 'intermods, which means intermodulation products' (or just mixing products)also at various multiples of the local oscillator frequency. These are real signals.. Real radios have preselection to filter these signals out, scanners, being broadbanded, escentially do not. These signals are another reason why an external preamplifier can cause more trouble than it is worth. These signals are real and can cause all kinds of problems, the reason why one is better off with an amateur two meter radio or RR freq only radio over a wide band scanner..... Elsie Kay


Nice explanation, thank you.
User avatar
Plate F
 
Posts: 266
Joined: Mon May 21, 2007 9:25 pm
Location: Geneva, NY

Previous

Return to Radio and Communications

Who is online

Users browsing this forum: No registered users and 1 guest