Earthquake in New Zealand

Discussion about railroad topics everywhere outside of North America.

Moderators: Komachi, David Benton

Re: Earthquake in New Zealand

Postby David Benton » Tue Nov 15, 2016 8:55 pm

i think they will end up tunneling some of it . Rail has an advantage in that it should be faster and cheaper to tunnel for rail than road.
However the current govt is very pro road, lukewarm rail, to say the least.
Moderator worldwide railfan , Rail travel & trip reports
The only train trips I regret are the ones I didn't take.
User avatar
David Benton
 
Posts: 7840
Joined: Thu Mar 11, 2004 11:29 pm
Location: New Zealand

Re: Earthquake in New Zealand

Postby David Benton » Tue Nov 15, 2016 9:53 pm

I'm not sure if this link will work , but it is the most close up picture of the damage I have seen so far. And this is the parts still accessible by road.

https://www.facebook.com/tim.burt.56/po ... 3794568478.
It appears the photographer is a young engineer with a road consultancy firm .
Moderator worldwide railfan , Rail travel & trip reports
The only train trips I regret are the ones I didn't take.
User avatar
David Benton
 
Posts: 7840
Joined: Thu Mar 11, 2004 11:29 pm
Location: New Zealand

Re: Earthquake in New Zealand

Postby philipmartin » Wed Nov 16, 2016 4:51 am

The link to Tim Burt's work is fine. The two tunnels look undamaged which surprises me.. I don't think I'd want to be In a tunnel when the landscape is moving around.
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby philipmartin » Wed Nov 16, 2016 4:58 am

Hauraki rail trail. It shows the scenery on the old East Coast Main trumk, now a bike path between Paeroa and Waikino.


http://youtu.be/6Rb50bsLyeQ
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby philipmartin » Wed Nov 16, 2016 5:24 am

Oamaru fan trip or just a general enjoyment ride

http://youtu.be/vlPlIIntgLs



http://youtu.be/c0uK66wmRSY
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby ExCon90 » Wed Nov 16, 2016 4:13 pm

philipmartin wrote:YouTube NZ Kiwi train rodeo. Do they have markers on the hind end of these trains?

http://youtu.be/SEeQX1YcV24


http://youtu.be/YkcBmshZEyA

In the first video, an emu train is displaying markers at 3:49. On the immediately following video, "departure from Wellington," right at the beginning, when the equipment is backing in, there are markers on the rear. (I assume they're called something else in the Commonwealth--tail lamps, as in Britain?)
On the second video, a flashing red marker is shown at 10:51.
David, at 3:15, there is a signal to the right of the track, and at the end of the run the driver is on the right side of the engine. Was that usual, on a left-hand-running railway?
ExCon90
 
Posts: 3465
Joined: Thu Sep 18, 2008 1:22 pm

Re: Earthquake in New Zealand

Postby philipmartin » Wed Nov 16, 2016 6:22 pm

Thanks Excon. I asked about markers because there is video of a passenger train with a black hind end. I hope I can find again. Here's a video from the archives.

http://youtu.be/z2VEv7ampdM

.
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby David Benton » Wed Nov 16, 2016 7:03 pm

Passenger carriages,locos and guards vans have 3 red lights for the rear , 2 on the left , 1 on the right . I dont know if that pattern signifies anything. Freight trains have a coupler mounted flashing red light , part of the "FRED", cant recall what the f stands for , the rest is rear end device ???
Wellingtons EMU's have always had the driver sitting on the right , i have only just considered this is not normal from your questions. With the sharp curves in Nz signals are on whatever side of the track gives best visibility, on double track (what little there is), it would be to the left of normal running direction.
I think on diesel trains, the driver/engineer sits on the left, but possibly on steam trains they sit on the right .
I will ask on a facebook page if anyone knows for sure , and the reasons.
Philip, find a video of the Coastal pacific train, that is the passenger train on the route that has now been decimated.
Moderator worldwide railfan , Rail travel & trip reports
The only train trips I regret are the ones I didn't take.
User avatar
David Benton
 
Posts: 7840
Joined: Thu Mar 11, 2004 11:29 pm
Location: New Zealand

Re: Earthquake in New Zealand

Postby David Benton » Thu Nov 17, 2016 12:24 am

It appears the engineer does sit on the right in most instances.
Here is a link to the discussion , I don't know if you can view a discussion in a closed group ? If you can't let me know , and I'll cut an paste it .
Moderator worldwide railfan , Rail travel & trip reports
The only train trips I regret are the ones I didn't take.
User avatar
David Benton
 
Posts: 7840
Joined: Thu Mar 11, 2004 11:29 pm
Location: New Zealand

Re: Earthquake in New Zealand

Postby philipmartin » Thu Nov 17, 2016 6:09 am

David Benton wrote:Philip, find a video of the Coastal pacific train, that is the passenger train on the route that has now been decimated.

Thank you, David. The video I saw was probably of the East Coast main trunk, a passenger train . I wonder if the crew just forgot to light up the hind end.
The red light you mention, on the end of freights sounds like the telemetry we use over here. It replaced the caboose.
Attachments
FRED_cropped-1.jpg
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby philipmartin » Thu Nov 17, 2016 5:28 pm

A ride on the Thames Branch from Paeroa to Thames

http://youtu.be/Z2NmVi8F0jQ

.
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby ExCon90 » Thu Nov 17, 2016 5:35 pm

David Benton wrote: cant recall what the f stands for , the rest is rear end device ???

Rear-end device is correct, and I think the F stood for "flashing"--although in practice many employees substituted another word. The terminology has since been changed to End-of-train (EOT) device.
ExCon90
 
Posts: 3465
Joined: Thu Sep 18, 2008 1:22 pm

Re: Earthquake in New Zealand

Postby philipmartin » Fri Nov 18, 2016 10:36 pm

Historic New Zealand.

http://youtu.be/urI7AUMd8iA
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby philipmartin » Sat Nov 19, 2016 9:00 am

Rebuilt British Rail cars in NZ.

http://youtu.be/DX2lsTYMEfA
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

Re: Earthquake in New Zealand

Postby philipmartin » Sat Nov 19, 2016 9:31 am

NZ Overlander:

http://youtu.be/uYpLvl1QwtY

Wiki on the Overlander:

)
https://en.m.wikipedia.org/wiki/Overlander_(train)









Sent from my iPad
User avatar
philipmartin
 
Posts: 3652
Joined: Sun Jul 13, 2008 3:42 pm
Location: Pennsylvania, USA

PreviousNext

Return to Worldwide Railfan

Who is online

Users browsing this forum: No registered users and 1 guest