Peoria Locomotive Works PL1500

All about locomotive rebuilders, small locomotive works, and experimental works

Moderator: Komachi

Peoria Locomotive Works PL1500

Postby Roland1 » Fri Jun 30, 2006 11:50 am

Hello ,
for a new modeling project in 0 gauge I am looking for drawings and good pictures of the PLW PL1500/SC15-A3 locomotives. It is a CAT powered switcher based on a SW1200. Just 3 were built and they are now in service for the Tazewell & Peoria RR, former PPU. Any informations and non published pictures are welcome. Roofshots were perfet !
regards
Roland Marx
Germany
Roland1
 

Postby GOLDEN-ARM » Sat Jul 01, 2006 11:11 pm

I have pix, and have run them, as well as the re-powered Geeps, too. I will post some pix, when I get my stuff, out here where I am living. Two of those switchers have the cab end as the front, and one was changed, to long hood forward, but the control stand was not moved to the opposite side. VERY confusing for all involved, while switching......... :( I did the "start-up", when RailAmerica took over operations, from the P&PU, and spent every day running those weird little engines. Will post pix, when I get them........... :-D
User avatar
GOLDEN-ARM
 
Posts: 2754
Joined: Wed Jan 26, 2005 10:53 pm
Location: " SunRail CFRC 100, North at Church Street Station"


Return to Rebuilders & Smaller Locomotive Works

Who is online

Users browsing this forum: No registered users and 1 guest