RDC-1 blueprints/diagrams?

Discussion about RDC's, "doodlebugs," gas-electrics, etc.

RDC-1 blueprints/diagrams?

Postby nhrdc1 » Thu Sep 13, 2007 9:05 pm

New to list. I am looking for blueprints, diagrams for the RDC-1. These would be for the real thing, not a model. Any ideas on where to locate a copy of these? Any help is greatly appreciated.
nhrdc1
 

Postby DutchRailnut » Thu Sep 13, 2007 9:25 pm

try contacting engineering dept at MBTA or MNCR or NJT I am sure they can print you some stuff from Microfilm, those techno boys keep all their goodies.
If Conductors are in charge, why are they promoted to be Engineer???

Retired Triebfahrzeugführer
User avatar
DutchRailnut
 
Posts: 21236
Joined: Thu Mar 11, 2004 8:02 pm
Location: released from Stalag 13

Postby nhrdc1 » Fri Sep 14, 2007 7:23 pm

Thanks for the info. I just have to figure out how to contact them.

Do you think that the B+M historical society might have this type of info? I belonged to them many years ago and recall that they have quite a library of reference material.

thanks again!

Paul
nhrdc1
 

Postby DutchRailnut » Fri Sep 14, 2007 9:49 pm

If I said yes or No it would be pure speculation, as member you know who to contact and find out for yourself.
If Conductors are in charge, why are they promoted to be Engineer???

Retired Triebfahrzeugführer
User avatar
DutchRailnut
 
Posts: 21236
Joined: Thu Mar 11, 2004 8:02 pm
Location: released from Stalag 13

Postby nhrdc1 » Sat Sep 15, 2007 8:52 am

I guess my reply was confusing. I was referring to the various eng departments that you sugguested at the RRs.

As far as the B+M society, I am no longer a member, just thought that a current member might know. I am planning on joining it again.
nhrdc1
 

Postby DutchRailnut » Sat Sep 15, 2007 11:16 am

Just look up mailing adress for each railroad.
and adress it to Chief Mechanical officer, and explain to him your dilema, and if he could find out from Engineering Dept if they have the drawing you need on file or microfilm.

keep in mind that despite looking for RDC-1 drawing they would only have drawings pertaining to their RDC-1's, a NH car was very much different than a NYC or B&M car.
If Conductors are in charge, why are they promoted to be Engineer???

Retired Triebfahrzeugführer
User avatar
DutchRailnut
 
Posts: 21236
Joined: Thu Mar 11, 2004 8:02 pm
Location: released from Stalag 13

Postby jimmiegag » Sun Sep 16, 2007 4:17 pm

Re: RDC, information
nhrdc1,
What specific information do you need? Can you tell me what sort of project you are planning. I also need the car number and railroad as well as the Budd builder number to be more helpful. Many of these cars were rebuilt in the past by railroads as well as Amtrak, BC rail ect.

If you are looking for working drawings (builder drawings) you will not find them anywhere, but you could ask Bombardier Corp. who has all the former Budd RDC drawings for the Budd RDC. That suggestion may not be a good idea either, because Bombardier sent almost all the RDC material to a box car in Canada. No one there knows how to even look for it, if it were possible to even get to it.

I have in my posession, however, some material that you may be looking for. I got it years ago from Bombardier before they sent it all to Canada.

Please list here the material you need, or get hold of me with a phone number/email address that I can get in touch with you.

By the way, I have restored five RDC cars, so I am familiar with the problems you may be facing if indeed you are thinking of restoring a car.

Jim Gagliardi
Budd RDC Foundation, Inc.
jimmiegag
 

rdc info

Postby nhrdc1 » Wed Sep 19, 2007 9:25 pm

Jim,

Thanks for the reply, you are the one I need to talk to. I have sent you a message with my email.

Paul
Last edited by nhrdc1 on Wed Sep 19, 2007 9:26 pm, edited 1 time in total.
nhrdc1
 


Return to Self-Propelled Railcars

Who is online

Users browsing this forum: No registered users and 2 guests